10 Easy Steps to Make Eyes White in Photoshop: A Beginner’s Guide [Includes Before and After Photos]

Short answer: Make eyes white in Photoshop by selecting the “Dodge” tool, setting the brush to a soft edge and reducing the exposure. Brush over the whites of the eyes until they are brightened to your desired level. Alternatively, use the “Sponge” tool and desaturate any yellow or red tones.

Step-by-Step Guide: How to Make Eyes White in Photoshop

Photoshop is a powerful tool for image editing and manipulation, allowing users to make even subtle adjustments that can completely transform an image. One of the most common tasks in Photoshop is to remove distractions, correct color issues and make eyes white.

Whether you’re fixing an over-exposed photograph or simply want to enhance the look of someone’s eyes in a portrait, learning how to make eyes white in Photoshop is an essential skill for any photo editor. Here’s our step-by-step guide.

Step 1: Open your photo in Adobe Photoshop
Before we start making any changes, open your image in Adobe Photoshop. To do this, go to “File” then select “Open”. Once you’ve located and selected the right file from your computer or workspace, open it up.

Step 2: Select Lasso Tool
From the main toolbar select Lasso tool (keyboard shortcut ‘L’) which will allow us to draw a selection around the iris of each eye. Use your mouse or tablet pen tip to draw around the iris with Lasso tool.

Step 3: Invert Selection
Once you have drawn two selections on both iris’ hold down shift+ctrl+i (Mac – Command+Shift+i). This will invert the selection meaning all areas outside of selection become actually selected.

Step 4: Hue/Saturation Adjustment Layer
Now click on Create new fill or adjustment layer button at bottom part of Layers panel (It looks like circle with half filled dot) then choose Hue/Saturation… from it.
In pop-up window check mark option Use Previous Layer: Hue/Saturation layer then move Saturation slider towards left until -100. This will desaturate all those areas except our previously made selection around pupil.

To complete whitening process drag Lightness slider towards right until getting desired level of whiteness inside pupils only(as shown below):

Step 5: Fine Tune White Balance
Use dodge/burn tool or brush tool to further adjust lighting around eye if needed.

Step 6: Refining Edges
If you find some areas around eyes are still affected from the previous process, select Lasso Tool again and draw opposite selection of same area where issue exists. This will help to refine the edge you already made.

Step 7: Save and Share
When finished making all changes, save your work with Ctrl+S (Mac – Command+S) keyboard shortcut so it’s ready for sharing, printing or using however you need. Export file in JPEG or PNG as your requirement.

And voilà! That’s how easy it is to make eyes white in Photoshop. With just a few simple steps, you’ve transformed a distracting image into one that truly captures the essence of the subject. Remember that mastering photo editing takes time and practice, so don’t be afraid to experiment with different techniques and learn more advanced skills as you become more skilled with Photoshop.

Avoiding Common Mistakes: FAQs About Making Eyes White in Photoshop

As a professional photographer or graphic designer, making eyes white in Photoshop can be an essential skill to have. However, it’s not always an easy task as there are several common mistakes that people tend to make. In this article, we’ll go over some frequently asked questions about making eyes white in Photoshop and provide you with useful tips on how to avoid these mistakes.

1. What tool should I use for whitening eyes?

The best tool for whitening eyes is the “Dodge” tool. It can lighten specific areas of an image without affecting the other parts. You can also adjust the size and the intensity of the brush by using the settings panel at the top.

2. Can I just use a white brush to paint over my subject’s pupils?

Painting over your subject’s pupils with a simple white brush may seem like a quick solution, but it never looks natural. The result will be a flat and unrealistic appearance that doesn’t blend well with your image. Remember that human eyes reflect light and have varying shades of gray, so try adding subtle gray tones around the whites of their eyes to achieve more realistic results.

3. How do I avoid making my subject look too bright?

One common mistake when whitening eyes is going too far by brightening them too much or erasing any natural shadows they might have had before. This creates an unnatural and almost ghostly look which no one desires in their photo! To avoid this problem, it is recommended to gradually lighten up only certain areas instead of entirely whiting out your subjects’ entire face.

4. Will sharpening help make my photos look better?

Sharpening your photo won’t directly make your subject’s eyes whiter or brighter; however, improving focus through sharpness can help emphasize specific features such as their pupils which need enhancement during this process!

5. Are there any rules to follow for post-processing in general?

It would help if you always aimed for a natural and organic look. Avoid over-editing your photos and stick to enhancing when needed, not necessarily improving it. Keep in mind the purpose of your image as well because certain styles may require different post-processing techniques.

In conclusion, making eyes white in Photoshop can be a tedious but essential process in bringing out the best features of your subject. Remember always to aim for natural-looking results with subtle improvements instead of drastic changes that will make your photos look fake or overly edited. With some practice and patience, you can avoid common mistakes and achieve professional-looking results!

Mastering the Art: Tips and Tricks for Perfectly white eyes in Photoshop

Have you ever taken a photograph that you absolutely loved, but then noticed that your subject’s eyes were looking dull and yellow? Fear not! Thanks to the power of modern technology, you can easily enhance and brighten eyes in Photoshop to give them that sparkling white look.

First things first: Select the area around the eyes
Using the lasso tool, select the area around both of your subject’s eyes. Make sure it is neat and even.

Next: Brightening up those peepers!
Now, navigate to Image > Adjustments > Levels. A histogram will appear, displaying brightness levels for red, green and blue.

Underneath the histogram there is three arrows which either move left or right. These are used to change each color channel individually. However since we’re focusing on our subject’s eyes, we want to focus in on just one of these channels – usually blue since they’re supposed be white!

By dragging the arrow under Output Levels towards the right until it nears where does this bar begin? (0/1) , it should cause all areas with lower values than ‘Gray Input Level’ accordingly causing a whitening effect.

Using Masks for better accuracy
One potential issue with using Levels adjustments directly over your entire image is that other areas may become unnaturally brightened as well – losing details in their faces for example!

To avoid this problem, it is better practice to use adjustment layers so that editing effects only apply within respective selected areas of an image. To do so:

– Click on Adjustment Layers on bottom right hand corner panel.
– Select Channel Mixer..
– Now from individual channels click blue present here:

INPUTS OUTPUT
Red | 100% | 0%
Green | 0% | 0%
Blue | -100% | +100%

Under “Output” column set value of Blue channel as positive (+).Don’t worry! This change will only affect the mask!

– Press OK
– Now invert the current mask by pressing CMD/CTRL+i. You should now clearly see that we’ve a black fill layer applied over adjustment layer)
– Grab an . Adjust which area near eyes needs to be whitened more or less accordingly.
– Invert selection again (CMD/CTRL+i) in order to apply this specific effect on subject’s eyes only.

Voila! Perfectly white eyes

You’re done! By selectively enhancing and adjusting the brightness levels in Photoshop, you can achieve beautifully bright and clear eyes – without sacrificing other details in your image.

Keep practicing and experimenting with different tonal values so as to create richly detailed images full of life and depth; ultimately showcasing your unique creative style!

Top 5 Facts You Need to Know When Making Eyes White in Photoshop

As a photography enthusiast or professional, you might have come across situations where your subject’s eyes have turned red, yellow or simply not as white as you would like them to be. Thankfully, with the power of Photoshop, it is possible to fix such issues and make eyes stand out in your images. However, this feat is not always easy to accomplish without proper guidance. In this blog post, we will share with you the top five facts you need to know when making eyes white in Photoshop.

1. Correction tools and techniques: Before diving into the specifics of correcting eye color in Photoshop, it’s essential to understand the various tools at your disposal. Some popular methods used by photographers include adjustment layers (such as Hue/Saturation), Curves adjustments, brush tool corrections using masks and dodging/burning techniques.

2. Color correction essentials: Eye color tends to change depending on several factors such as environment lighting conditions and skin tone variations. Thus, before starting any eye color editing process using Photoshop, ensure that you correctly identify what needs correcting and why before deciding which method/tools are best suited for the task.

3. Subtlety is key: Making eyes too bright; can end up looking unnatural leading unwanted results that don’t complement other elements within an image or may appear comical or creepy! When working on eye color correction projects in photoshop always strive for natural-looking results by adjusting brightness levels gradually until satisfactory subtle-like effects are achieved.

4. Individual vs multiple subject portraits: Suppose undertaking a portrait session featuring more than one individual posing for pictures e.g., during group photo sessions or weddings involving bridal parties or family events.. In that case, make sure each person’s eyes are corrected uniquely(for instance when adjusting contrast levels ), taking into account skin tones contrasts.

5. Practice makes perfect: The last but certainly not least important point is that mastering any skill- especially when working with photoshop-is improved through practice frequently! Color correction, particularly for eyes or other subtler features, requires precision, patience and time. Be sure to dedicate regularly scheduled practice sessions (preferably with a range of image sources) sharpen your photoshop retouching skills to achieve breathtaking results ultimately.

In conclusion, making eyes white in Photoshop can be easier than you imagined when you have the right knowledge and tools at your disposal. By following these top five facts outlined above, it will be possible to produce beautiful post-processed images that make subjects’ eyes appear brighter, more vivid and natural-looking. Happy editing!

Add Some Magic: Creative Techniques for Enhancing Eye Color While Making Them White in Photoshop

Eyes are known as the windows to our souls, and it is no wonder that people want them to be captivating and mesmerizing. With advances in technology, we can now enhance eye color while simultaneously making them whiter through creative techniques in Photoshop.

Photoshop is a powerful tool that allows us to alter various aspects of an image, including the eyes. The first step towards enhancing your subject’s eyes is selecting the right color. Some colors look better than others based on skin tones and hair color. Blue or green colored eyes work best with fair skin tones whereas brown or hazel eyes pair well with warmer skin tones.

Once you have determined the color scheme you want to use, it is time to change their hue saturation levels by going into adjustments > hue/saturation from the menu bar. Here, you can increase or decrease the saturation levels of specific colors like blues or greens until they become more vibrant while keeping other subtle elements like shadows intact.

Next comes making the whites of their eyes – well – whiter! This can easily be achieved by creating a new adjustment layer called Curves (adjustments > curves) and selecting Channel “Green”. After doing so, adjust the diagonal line so that it moves up slightly then create a second point about midway down on this curve graph; this will be your anchor point. Dragging this second point over here helps remove any green tinting in the whites without affecting any other colors in your photo.

After that slight curve adjustment has been made, go back into Adjustments once again from your menu bar then select Hue/Saturation Layers One More Time! This time around though choose Channel “Master” before bringing up Saturation Slider once more: drag it all way down until your photo becomes monotone grayish-white then dial it back up ever so slightly which brings out more natural depth within person’s pupils than having left them washed out looking lifeless altogether!

Once you’ve achieved the desired color and white balance, it’s time to fine-tune the image. Start by selecting the Healing Brush tool from your toolbar, then use it to remove any imperfections in or around the eyes- like blemishes or redness. In some cases, eye veins may also need to be removed using a more advanced technique known as frequency separation which is beyond the scope of this blog post.

Finally, pay close attention to any inconsistencies between their right and left eyes, such as differing levels of saturation or brightness. Selecting each eye individually will allow you to tweak each one accordingly and make them appear more symmetrical.

In conclusion, enhancing eye color and whiteness in Photoshop can breathe new life into your portraits. By following these simple creative techniques, you’ll be able to produce stunning results that are both professional-looking and captivating at the same time!

Final Thoughts: Bringing Your Portrait Photography to Life with Perfectly Whitenened Eyes Using Photoshop

In the world of professional portrait photography, there are a number of aspects that need to be taken into consideration in order for an image to truly come to life. One such aspect is making sure that the subject’s eyes look striking and luminous, drawing in the viewer and conveying depth and emotion.

One way to accomplish this is by utilizing Photoshop to whiten the eyes, providing a crisp contrast against darker features, bringing out their natural highlights and making them appear brighter and more vibrant overall.

But simply slapping on a white brush tool without any extra thought or finesse won’t do – it takes some skill as well as an understanding of human anatomy in order to create a brightening effect that looks natural rather than cartoonish.

So what exactly goes into creating perfectly whitened eyes using Photoshop? First off, you want to make sure that you’re selecting just the whites of the eyes themselves and not accidentally brightening other areas such as the tear ducts or eyelids. This can be accomplished via selecting tools such as lasso or magic wand tools followed by precise adjustment via brightness/contrast sliders or with the help of dodge & burn technique.

When enhancing the whites, pay attention to shadows around eyes. These are often prominent which will require additional efforts for light reflecting over specular objects inside cornea for balancing editing process. Also avoid leaving harsh edges or maintaining symmetry during final look will bring together harmonious results.

Make sure that you zoom into your photo closely while applying edits so you can see exactly what they’ll look like once the file has been blown up to its final size. Adjust the levels of whiteness until they look great both in terms of close inspections as well as standard viewing sizes.

By combining these various aspects, a skilled photo editor can help bring out the striking beauty and soulfulness of their subject’s eyes in a natural and professional way. So next time you’re working on portrait photography and looking to make your images truly pop, don’t forget about paying close attention to the whites of your subject’s eyes!

Table with useful data:

Information from an expert

As a professional graphic designer, I can provide insights on how to make eyes look white in Photoshop. The first step is to create a new adjustment layer for Curves and adjust the brightness and contrast until you get the desired level of whiteness. Next, add a Hue/Saturation layer, decrease the saturation slider, and increase the lightness slider gradually. Finally, use the eraser tool to remove any white cast from other areas of the image that may have been affected during the process. By following these steps carefully, you can effectively enhance your subject’s eyes in Photoshop.

Historical Fact:

The practice of altering images to create an unrealistic portrayal of the human body is not a new phenomenon. Historically, artists have been known to manipulate their subject’s appearance in paintings, sculptures, and photographs long before digital editing tools were available.